我用UD做的，请帮我改改，使我不用设ODBC就可使用。
我用UD做了一个最简单的记录集显示，因为UD在制作过程中
使用了ODBC所以我无法在我的虚拟主机上使用，哪位帮我改
一下，让我可以不设ODBC就可使用程序的。
谢谢。
共两个文件 ，conn.连接文件
show.asp记录显示文件
conn.asp文件
<%
' FileName="Connection_odbc_conn_dsn.htm"
' Type="ADO"
' HTTP="false"
' Catalog=""
' Schema=""
MM_conn_STRING = "dsn=odbc;"
%>
show.asp
<%@LANGUAGE="VBSCRIPT"%>
<!--#include file="Connections/conn.asp" -->
<%
set Recordset = Server.CreateObject("ADODB.Recordset")
Recordset.ActiveConnection = MM_conn_STRING
Recordset.Source = "SELECT * FROM guest_message ORDER BY id DESC"
Recordset.CursorType = 0
Recordset.CursorLocation = 2
Recordset.LockType = 3
Recordset.Open()
Recordset_numRows = 0
%>
<%
' *** Move To Record and Go To Record: declare variables
Set MM_rs = Recordset
MM_rsCount = Recordset_total
MM_size = Recordset_numRows
MM_uniqueCol = ""
MM_paramName = ""
MM_offset = 0
MM_atTotal = false
MM_paramIsDefined = false
If (MM_paramName <> "") Then
MM_paramIsDefined = (Request.QueryString(MM_paramName) <> "")
End If
%>
<%
' *** Move To Record: handle 'index' or 'offset' parameter
if (Not MM_paramIsDefined And MM_rsCount <> 0) then
' use index parameter if defined, otherwise use offset parameter
r = Request.QueryString("index")
If r = "" Then r = Request.QueryString("offset")
If r <> "" Then MM_offset = Int(r)
' if we have a record count, check if we are past the end of the recordset
If (MM_rsCount <> -1) Then
If (MM_offset >= MM_rsCount Or MM_offset = -1) Then ' past end or move last
If ((MM_rsCount Mod MM_size) > 0) Then ' last page not a full repeat region
MM_offset = MM_rsCount - (MM_rsCount Mod MM_size)
Else
MM_offset = MM_rsCount - MM_size
End If
End If
End If
' move the cursor to the selected record
i = 0
While ((Not MM_rs.EOF) And (i < MM_offset Or MM_offset = -1))
MM_rs.MoveNext
i = i + 1
Wend
If (MM_rs.EOF) Then MM_offset = i ' set MM_offset to the last possible record
End If
%>
<%
' *** Move To Record: if we dont know the record count, check the display range
If (MM_rsCount = -1) Then
' walk to the end of the display range for this page
i = MM_offset
While (Not MM_rs.EOF And (MM_size < 0 Or i < MM_offset + MM_size))
MM_rs.MoveNext
i = i + 1
Wend
' if we walked off the end of the recordset, set MM_rsCount and MM_size
If (MM_rs.EOF) Then
MM_rsCount = i
If (MM_size < 0 Or MM_size > MM_rsCount) Then MM_size = MM_rsCount
End If
' if we walked off the end, set the offset based on page size
If (MM_rs.EOF And Not MM_paramIsDefined) Then
If (MM_offset > MM_rsCount - MM_size Or MM_offset = -1) Then
If ((MM_rsCount Mod MM_size) > 0) Then
MM_offset = MM_rsCount - (MM_rsCount Mod MM_size)
Else
MM_offset = MM_rsCount - MM_size
End If
End If
End If
' reset the cursor to the beginning
If (MM_rs.CursorType > 0) Then
MM_rs.MoveFirst
Else
MM_rs.Requery
End If
' move the cursor to the selected record
i = 0
While (Not MM_rs.EOF And i < MM_offset)
MM_rs.MoveNext
i = i + 1
Wend
End If
%>
<%
' *** Move To Record: update recordset stats
' set the first and last displayed record
Recordset_first = MM_offset + 1
Recordset_last = MM_offset + MM_size
If (MM_rsCount <> -1) Then
If (Recordset_first > MM_rsCount) Then Recordset_first = MM_rsCount
If (Recordset_last > MM_rsCount) Then Recordset_last = MM_rsCount
End If
' set the boolean used by hide region to check if we are on the last record
MM_atTotal = (MM_rsCount <> -1 And MM_offset + MM_size >= MM_rsCount)
%>
<%
' *** Go To Record and Move To Record: create strings for maintaining URL and Form parameters
' create the list of parameters which should not be maintained
MM_removeList = "&index="
If (MM_paramName <> "") Then MM_removeList = MM_removeList & "&" & MM_paramName & "="
MM_keepURL="":MM_keepForm="":MM_keepBoth="":MM_keepNone=""
' add the URL parameters to the MM_keepURL string
For Each Item In Request.QueryString
NextItem = "&" & Item & "="
If (InStr(1,MM_removeList,NextItem,1) = 0) Then
MM_keepURL = MM_keepURL & NextItem & Server.URLencode(Request.QueryString(Item))
End If
Next
' add the Form variables to the MM_keepForm string
For Each Item In Request.Form
NextItem = "&" & Item & "="
If (InStr(1,MM_removeList,NextItem,1) = 0) Then
MM_keepForm = MM_keepForm & NextItem & Server.URLencode(Request.Form(Item))
End If
Next
' create the Form + URL string and remove the intial '&' from each of the strings
MM_keepBoth = MM_keepURL & MM_keepForm
if (MM_keepBoth <> "") Then MM_keepBoth = Right(MM_keepBoth, Len(MM_keepBoth) - 1)
if (MM_keepURL <> "") Then MM_keepURL = Right(MM_keepURL, Len(MM_keepURL) - 1)
if (MM_keepForm <> "") Then MM_keepForm = Right(MM_keepForm, Len(MM_keepForm) - 1)
' a utility function used for adding additional parameters to these strings
Function MM_joinChar(firstItem)
If (firstItem <> "") Then
MM_joinChar = "&"
Else
MM_joinChar = ""
End If
End Function
%>
<%
' *** Move To Record: set the strings for the first, last, next, and previous links
MM_keepMove = MM_keepBoth
MM_moveParam = "index"
' if the page has a repeated region, remove 'offset' from the maintained parameters
If (MM_size > 0) Then
MM_moveParam = "offset"
If (MM_keepMove <> "") Then
params = Split(MM_keepMove, "&")
MM_keepMove = ""
For i = 0 To UBound(params)
nextItem = Left(params(i), InStr(params(i),"=") - 1)
If (StrComp(nextItem,MM_moveParam,1) <> 0) Then
MM_keepMove = MM_keepMove & "&" & params(i)
End If
Next
If (MM_keepMove <> "") Then
MM_keepMove = Right(MM_keepMove, Len(MM_keepMove) - 1)
End If
End If
End If
' set the strings for the move to links
If (MM_keepMove <> "") Then MM_keepMove = MM_keepMove & "&"
urlStr = Request.ServerVariables("URL") & "?" & MM_keepMove & MM_moveParam & "="
MM_moveFirst = urlStr & "0"
MM_moveLast = urlStr & "-1"
MM_moveNext = urlStr & Cstr(MM_offset + MM_size)
prev = MM_offset - MM_size
If (prev < 0) Then prev = 0
MM_movePrev = urlStr & Cstr(prev)
%>
<html>
<head>
<title>显示留言</title>
<meta http-equiv="Content-Type" content="text/html; charset=gb2312">
</head>
<body bgcolor="#FFFFFF" text="#000000">
<p>
<table width="75%" border="1">
<tr>
<td height="276" align="center" valign="middle">
<div align="center">
<p><br>
</p>
<table width="87%" border="1" height="107">
<tr bgcolor="#000000">
<td width="25%"> </td>
<td width="75%"> </td>
</tr>
<tr>
<td width="25%">name</td>
<td width="75%"><%=(Recordset.Fields.Item("name").Value)%></td>
</tr>
<tr>
<td width="25%">sex</td>
<td width="75%"><%=(Recordset.Fields.Item("sex").Value)%> </td>
</tr>
<tr>
<td width="25%">oicq</td>
<td width="75%"><%=(Recordset.Fields.Item("oicq").Value)%> </td>
</tr>
<tr>
<td width="25%">homepage</td>
<td width="75%"><%=(Recordset.Fields.Item("homepage").Value)%></td>
</tr>
<tr>
<td width="25%" height="21">email</td>
<td width="75%" height="21"><%=(Recordset.Fields.Item("email").Value)%> </td>
</tr>
<tr>
<td width="25%" height="19">subject</td>
<td width="75%" height="19"><%=(Recordset.Fields.Item("subject").Value)%> </td>
</tr>
<tr>
<td width="25%">content</td>
<td width="75%"><%=(Recordset.Fields.Item("content").Value)%> </td>
</tr>
<tr>
<td>date</td>
<td><%=(Recordset.Fields.Item("mydate").Value)%> </td>
</tr>
</table>
<p> </p>
</div>
</td>
</tr>
</table>
<p> </p>
</body>
</html>
<%
Recordset.Close()
%>
